INSTRUCTIONS FOR THE NEW SORBO UNIVERSAL SWIVEL FAST RELEASE HANDLE WITH AN OUTLET FOR SAFETY LINE

This versatile fast release handle fits Sörbo and most channels on the market.

INSTRUCTIONS FOR USE WITH SÖRBO 3X4 CHANNELS:

This handle is adjusted and assembled at the factory and can be damaged if the brass adjustment nut us tightened too tightly. The handle is adjusted for the Sörbo 3x4 Adjustable Squeegee when it is shipped from the factory.

INSTRUCTIONS FOR USE WITH BRASS AND STAINLESS STEEL CHANNELS:

1. Insert brass channel into the channel into the handle with the fast release in closed position.

2. With a screw driver or quarter tighten the brass nut on the lower jaw until the brass squeegee is secure in the handle.

3. Open and close the fast release, inspect the channel and adjust the nut if necessary. Properly adjusted, you should be able to slide the channel with a little force when the fast release handle is in closed position. If channel falls out by itself, tighten the brass nut 1/4" turn and try again. If you have adjusted the handle for a brass channel and change to Sörbo 3x4 channel, remember to unscrew the brass nut and adjust the lower jaw again before closing the fast release.

*Turn Channel down to release channel. Insert channel by placing bottom in first and turn it upwards.	Left: Closed, Middle:Slide Right: Release channel straight out, sliding is not necessary.